North HeatmiserNeo Скачать руководство пользователя

Страница: 19 / 21

The HeatmiserNeo Driver

All Thermostats

Object Type:

[HeatmiserNeo v20\AllThermostat]

Object Type:

[HeatmiserNeo v10\AllThermostat]

The All Thermostats object is used to set common values across all zone thermostat devices.

Description

Reference Type

Standby Mode

Activates standby mode, also called frost
protection mode. In this mode the neoStat

will only turn on heating if the room
temperature falls below the Frost
Protection Setpoint

V46

Obj\OffOn; Adjustable

Frost Protection Setpoint

Temperature maintained in frost protect

or holiday modes

V109

Obj\Num: 7…17; Adjustable

Heat/Cool Mode

V22

Obj\ENum; Adjustable

Values: 0=Vent, 1=Heating, 2=Cooling, 3=Auto

Hold Temperature

Set to activate hold temperature for
Default Hold Time, or ‘0’ to cancel hold

V24

Obj\Num; Adjustable

Hold Time (mins)

Set a time to activate or extend the hold

time, or ‘0’ to cancel hold

V25

Obj\Num; Adjustable

Floor Temperature Limit

Set a floor limiting temperature,
depending on sensor selection.

V108

Obj\Num: 20…45; Adjustable

Comfort Level – day

Contains a list of time-temperature values
to define the profile for a

day

. Refer to

Program Mode for which days are in use.
A profile contains up to four time-
temperature values, referred within
Heatmiser at wake, leave, return, sleep.

The day,

, is in the range 1…7 where

1=Monday .. 7=Sunday

Obj\Profile: 4 or 6 periods; Adjustable

Switching Differential

Controls the switching differential of the
thermostat. The default is 1°, which means

with a setpoint temperature of 20°, the
thermostat will switch the heating on at
19° and off at 20°

V116

Obj\ENum: 0..3; Adjustable
Values: 0=0.5°, 1=1°, 2=2°, 3=3°

Output Delay (mins)

To prevent rapid switching, an output
delay set

V111

Obj\Num: 0…15; Adjustable

User Up/Down Limit

Limits the use of the up/down
temperature keys

V121

Obj\Num: 0…10; Adjustable

Max Preheat (Hrs)

Optimum start will delay the start-up of
the heating system to the latest possible

moment.

V110

Obj\Num: 0…5; Adjustable

Lock

Indicates if the keypad lock is active. Set to
‘Off’ (0) to unlock the keypad

V29

Obj\OffOn; Adjustable

Lock PIN

Set a 4-digit PIN to activate the keypad
lock

V30

Obj\Text: max 4 chars; Adjustable

Содержание HeatmiserNeo






















Результаты поиска

Содержание HeatmiserNeo

Отзывы:

Похожие инструкции для HeatmiserNeo

Бренды по названию

Популярные бренды

North HeatmiserNeo, Руководство пользователя

Результаты поиска

Содержание HeatmiserNeo

Отзывы:

Похожие инструкции для HeatmiserNeo

Бренды по названию

Популярные бренды