User Manual for Patient Monitor
6
system starts count-down after the alarm silent time is set and will activate the alarm when the count-down
ends.
The alarm silence time has 4 settings: 2 min, 5 min, 10 min and 20 min, or in alarm.
6
FREEZE
Press this key to freeze ECG wave, or ECG, SpO
2
based on the freezing settings in the system.
It also enters the ST segment manual analysis screen.
7
NIBP
Press this key to start NIBP measurement. Press it again to stop the measurement.
8
Press this key to print different waveforms on different screens.
In the main screen, archive/file management screen, color setting screen, it prints the ECG waveform, SpO
2
waveform.
In the NIBP data-listing screen, it prints the NIBP data list.
In the SpO
2
data- listing screen, it prints the SpO
2
data list.
In the Trend screen, it prints the system trend graph.
In the System menu, it prints the system parameter settings.
In the Recall screen, it prints the Recalled data list or prints current lead’s ECG waveform and Recalled
waveform.
9
DISP (Display)
Press this key to switch between initial monitoring screen and Observe Screen, and press it to return to the
main screen from other screens.
10 Navigation Knob
By rotating the navigation knob, the operator can choose the function and parameters. By pushing down and
releasing the knob, the operator can switch screen, confirm operations.
The majority of the operations of the monitor are performed by using navigation knob.
11 Alarm indicator
