North Star CutoMato 51, Инструкция по эксплуатации, Страница: 4 / 22

-4-
„
Grating or Waldorf style: attach the grating or Waldorf disc as in the slicing
options.
„
Cutting different sizes of cubes or sticks. Place permanent disc on its designated
base (picture 2.5), and attach the desired blade above it (picture 2.6).
Note : place the plate only after you swiftly clean the base.
Warning!
„
Hold blades only in designated holding points.
„
Keep your fingers away from blades.
„
Never apply too much pressure when installing or removing the cutting
appliances.
„
Always act gently and with consideration.
Option # 2
1. Prepare the compression system : attach the special round compressor as described in
option # 1 (see picture 3.1).
2. Prepare the feed tube. Place round adapter into its designated niche in the feed tube. You
can find the adapter’s correct place by turning it and then slide it all the way inside (see
picture 3.2).
Prepare blades:
„
Open cover as described in option # 1.
Fig. 2.6 Fig. 2.5 Fig. 2.4
Fig. 3.2 Fig. 3.1
3
22
8