North Star CutoMato 51, Инструкция по эксплуатации, Страница: 2 / 22

-2-
11
4
10
12
2
8
13
1
5 3
9A
9
11A
7
6
V
EGETABLES
S
LICING
M
ACHINE
,CUTOMATO M
ODEL
51
Instructions Manual
General
The Vegetables Slicing Machine, Cutomato Model 51, can process all types of vegetables and
fruits, including the soft and squashy ones.
General Description
The Slicing Machine includes the following basic components:
1.
The machine body
2. Machine cover
3. product pusher handle
4. Stainless Steel Cover – casing
5. Handle axis support and limit switch housing
6. Products fennel (body part)
7. Products fennel (cover part)
8. Feed tube for products input
9. Manual pusher
10. Cover locking handle
11. Base supporters
12. Off switch
13. On switch
Power Supply
Voltage: 208 – 230 VAC
110 VAC
Capacity: ½ HP
Operation
1. Place machine on stable working table, 70 cm high.
2. Place machine so there is space left on the working table for placing a container under the
fennel (6) for collecting the sliced products. If the base supporters (11) are too close to the
table’s edge (if the working table is less than 80 cm wide), you can choose between the 2
following options to your convenience:
„
Placing a mobile container adjacent to the working table, under the fennel, at an
appropriate height.
„
Installation of leading rods into the leading feed tube (11A) on the base supporters.
When selecting this option, it will be possible to place vessels, of a maximum of 11
cm high over these rods.