North Star 49157, Руководство пользователя

Страница: 15 / 30

Page 15 of 30
See Figure 3.
5. Remove Counterclockwise Nut (06) with the supplied 36mm wrench (07). If the shaft spins, hold it
in place with the supplied 32mm wrench (08).
6. Remove the Blade Holder Outer (09).
Figure 3
See Figure 4.
7. Install the Saw Blade (11) on the blade shaft (10) making sure that the pin hole in the Saw Blade
engages the pin of the Blade Holder Inner (12). Make sure that the Saw Blade is installed in the
correct direction of rotation (A).
Figure 4