North Star 49157, Руководство пользователя

Страница: 14 / 30

Page 14 of 30
Installing the Saw Blade
Check that the cutter engine is turned off and cooled before attempting any maintenance, cleaning, or
inspection to avoid an accidental start and possible injury.
Note: The saw blade is not supplied.
Diamond Saw Blade Specifications

Diameter (A): 14-inch

Arbor Hole (B): 25.4mm(1-inch)

Pin Hole (C): 13mm

Center to Center (D): 28.7mm.

Be sure to check the blade's direction of
rotation (01).

DO NOT use a blade that is missing a
segment (02) or is cracked. Damaged
and/or missing segments or cracks may
cause damage to your saw and injury to
the user or others in the operating area.
Figure 1
See Figure 2.
1. Raise the Concrete Cutter by turning the Elevator Handle clockwise.
2. Remove the Hose (03) from the One Touch Fitting (02).
3. Remove Nut (05), and then remove Bolt (04) using a 17mm wrench (not included).
4. Using the handle on the Blade Cover (01) rotate the cover back exposing the saw blade mounting
fixtures.
Figure 2