26
Operation – Using the Sprayer
Step Two: Fill the sprayer.
WARNING
ALWAYS wear personal protective equipment as directed on the
chemical label when handling pesticides.
Long pants and sleeves, chemical resistant gloves, and eye protection are
strongly recommended. Additional protective gear may be required
depending on the particular pesticide.
Fill the sprayer using the following steps:
1. Review safety
information
Review the ''Operation – Important Safety Information''
related to General
Chemical Safety and Chemical Accident Procedures provided in this manual.
2. Choose safe
mixing/
loading area
Choose a safe pesticide mixing and loading area.
- Choose an outdoor, well-ventilated area away from unprotected people, animals,
food, and other items that might become contaminated.
3. Wear personal
protective
equipment
Wear personal protective equipment as directed on the chemical label.
- Note that additional equipment may be specified for mixing and loading activities.
4. Turn off
sprayer and
vehicle
Turn OFF power to the sprayer before filling.
- The vehicle should also be off, with brake set or wheels blocked to prevent
unintended movement.
5. Remove fill
cap
Remove the fill cap located on top of the sprayer.
6. Ensure tank
flushed
Ensure tank is flushed of all chemicals from prior uses
.
- Chemicals can interact dangerously when mixed, and residue chemicals are also a
health hazard.
Fill cap
