manualshive.com logo in svg

North Star 165914, Руководство пользователя

Поделиться
Скачать
North Star 165914 Скачать руководство пользователя страница 30

Maintenance & Repair  

 

                      

30

 

                         

 

Inspect and maintain your generator as specified below in order to keep it in safe and optimal 
working order.  Follow all safety rules and recommended maintenance steps. 

 

   WARNING 

ALWAYS shut off the engine, disconnect the spark plug(s) and discharge the 
capacitor before cleaning, adjusting, or servicing the generator.  Make sure all 
guards and shields are replaced before using.  

   

Note:  The generator head is brushless and maintenance free.  The bearing is a heavy-duty 
sealed ball bearing which requires no maintenance or lubrication. 

 

Maintenance & Repair  

Follow safety rules 

Read and follow these safety rules whenever you will be servicing the 
generator: 

• 

Turn off generator.

  Always turn off generator and remove spark plug(s) 

or spark plug wire(s) before working on the engine or generator to prevent 
accidental starting. 

• 

Discharge capacitor.  

When the generator is shut down, the capacitor may 

maintain a charge.  Always discharge the capacitor before working on the 
generator head to prevent electrical shock.  Discharge using a screwdriver 
with an insulated handle.  While wearing safety glasses, touch opposite 
terminals of the capacitor together with the tip of the screwdriver.  If there 
is stored charge in the capacitor, a spark will be generated thereby 
discharging the capacitor. 

• 

Replace guards.

  Make sure all guards and shields are replaced after 

servicing the generator. 

• 

Repair.

  Major service, including the installation or replacement of parts, 

should be performed only by a qualified electrical service technician.  
Obtain factory approved parts from NorthStar Product Support at 1-800-
270-0810. 

 

• 

Replacement parts

.  If a part needs replacement, only use factory 

approved repair parts.  Replacement parts that do not meet specifications 
may result in a safety hazard or poor operation of the generator and will 
void the warranty.

 

 

Perform engine 
maintenance 

Perform engine maintenance as specified in the engine owner’s manual.  

Engine maintenance items include: 

1.  Changing oil and oil filter 
2.  Air filter check/replacement 
3.  Spark plug cleaning and replacement 
4.  Fuel filter check/replacement 
5.  Fuel tank cleaning. 
 

Содержание 165914











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды