3
EN
G
LI
SH
Lamp Post
Art. no 32-9058
36-3753
Please read the entire instruction manual before using the product and save it
for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. If you have any questions regarding
technical problems please contact Customer Services (see address on reverse).
Safety
Caution!
All light fittings must be installed in accordance with current safety
regulations to prevent life-threatening accidents. The installation should only be
performed by competent persons with a good knowledge of electrical wiring. If in
doubt, contact a qualified electrician.
Follow the instructions carefully and keep them for future reference.
The lamp comes with a rubber seal. This rubber seal must be used to ensure that
the lamp is watertight. Fit the rubber seal as shown in the picture below, making
sure that it is seated properly on the lamp base. This not only applies to initial
assembly but also to any subsequent light bulb changes.
Glass shade
Lamp housing
Rubber seal
Lamp base
