11
Step 6
- Unscrew the cap of the Igniter (12) and place one AAA buttery (E) inside, as shown below
Figure I. Replace the cover.
- Locate the battery cover on the timer and remove as shown below. Insert 2 AAA batteries (E).
Check the positive (+) and negative (-) symbols on the case and batteries to insure proper
installation. Replace the battery cover.
Step 7
-
Insert
the
12
〞
Thermometer (10) into the Stockpot Lid (2) as shown below.
-
Place the Poultry Stand (13) and Stockpot Lid (2) into the Stockpot as shown below.
Note:
-
When using the lid during cooking, the thermometer should be placed into the hole in the lid,
with the locking brace attached on the underside of the lid (Figure K)
-
When you are not using the lid during cooking, the thermometer should be attached to the side
of the stockpot by clipping the brace to the lip as shown (Figure L).
Figure L
Figure J
Figure K
Figure I
