2
RESIDUAL RISKS
Even when using this product
properly, there remains certain
residual risks that cannot be
eliminated. When working with the
pole saw, the following potential
dangers may arise:
•
Contact with flying sawdust
•
Inhalation of sawdust
•
Inhalation of oily dust
•
Contact of oil with skin
•
Contact of flying parts of the saw
chain
•
Cutting of fingers with saw chain
•
Contact with live parts (defective
power cord)
INTENDED/NON-INTENDED USE :
CHAINSAW
This chainsaw is designed for cutting
branches, trunks, logs, and beams
with a diameter determined by the
cutting length of the guide bar. It is
only designated to cut wood. It is
only to be used in an outdoor, non-
commercial setting. Do not use the
chainsaw for any purpose not
intended. This chainsaw is not to be
used for professional tree service.
The operator or user is responsible
for the damage resulting from
improper use. It is not to be used by
children or by persons not wearing
suitable protective gear.
Anyone who operates this machine
must read and observe the safety
instructions in this manual.
Familiarize yourself with the potential
hazards to help reduce risks. In
addition, local regulations must be
observed as well as occupational
health and safety. The manufacturer
is not liable for any damage resulting
from change of machine due to user.
RESIDUAL RISKS
Even when using this product
properly, there remains certain
residual risks that cannot be
eliminated. When working with the
pole saw, the following potential
dangers may arise:
• Contact with exposed saw teeth of
the saw chain (cutting hazards)
•
Access to the rotating saw chain
(cutting hazards)
•
Unforeseen, abrupt movement of
the guide bar
•
Flung out parts of the chain saw
•
Flung out parts of the work piece
•
Loss of eyesight, if proper eye
protection is not used.
•
Inhalation of work piece particles
•
Contact with broken electrical
wiring
WARNING: The actual existing
vibration emission value during
use of this product can deviate
from the manual or manufacturer
specifications. This can be caused
by the following factors:
•
Prolonged use of the product
exposes the user to vibrations that
can cause a range of conditions
collectively known as hand-arm
vibration syndrome (HAVS) e.g.
fingers going white; as well as
specific diseases such as carpal
tunnel syndrome.
•
To reduce the risk of HAVS, always
wear protective gloves and keep
your hands warm.
•
The symptoms of HAVS include
any combination of the following:
✤
Tingling and numbness in the
fingers,
✤
Not being able to feel things
properly,
✤
Loss of strength in the hands,
✤
Fingers going white (blanching)
and becoming red and painful on
recovery (particularly in the cold and
wet, and probably only in the tips at
first).
Seek medical advice immediately if
such symptoms are experienced.
SAFETY INSTRUCTIONS
WARNING: Read and understand
ALL safety instructions and
warnings before operating this
product. Failure to do so may
result in electric shock, fire,
and/or serious injury.
1. Work area safety
•
Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
•
Do not operate power tools in an
explosive atmosphere, such as in the
presence of flammable liquids,
gases, or dust. Power tools may
create sparks which can ignite the
dust or fumes.
•
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2. Electrical Safety
•
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with grounded power tools.
Unmodified plugs and matching
outlets will reduce the risk of electric
shock.
•
Avoid body contact with grounded
surfaces, such as pipes, radiators,
ranges, and refrigerators. There is an
increased risk of electric shock if
your body is grounded.
•
Do not expose power tools to rain
or wet conditions. Water entering the
power tool will increase the risk of
electric shock.
•
Do not abuse the cord. Never use
the cord for carrying, pulling, or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges, or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
•
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. This will
reduce the risk of electric shock.
