For the orginal latching system, pull the latch down to unlatch the
ramp liftgate from the frame one side at a time.
LOWERING THE RAMP
NEVER hold the ramp at the end of the ramp liftgate to lower onto the ground as this can cause injury
to hands and fingers.
NEVER stand behind the ramp liftgate to lower and/or close.
RAMP MUST REST LEVEL ON SURFACE. Ensure that the ground surface where the ramp edge will
rest, is level and parallel to the ramp edge. Lowering the ramp on an uneven surface can cause
damage to the ramp and cause the ramp to be unstable while loading and unloading. If you cannot
load and or unload on a level surface, DO NOT ATTEMPT TO USE THIS RAMP.
UNLEVEL SURFACE (BAD)
LEVEL SURFACE (GOOD)
When lowering the ramp, always use both hands to assist the
ramp to the ground. It is best to hold the ramp on the sides,
towards the end to maximize weight leverage. Keep your feet
away from the landing position of the ramp.
