North American HVAC MOC-12HFN1-MS0W, Руководство по обслуживанию

Страница: 104 / 157

Drainage pipe installation
100 Installation
Branch pipe
Water flow
Water flow
Keep a certain degree
Branch pipe
Gas
Gas
Main pipe
Main pipe
 The correct installation will not cause converse water flow and the slope of the branch pipes can be
adjusted freely
 The false installation will cause converse water flow and the slope of the branch pipe cannot be
adjusted.
6.2.6 Water storage pipe setting
 If the indoor unit has high extra static pressure and without water pump to elevate the condensate water,
such as high extra static pressure duct unit , the water storage pipe should be set to avoid converse flow
or blow water phenomena.
Indoor unit
More than 50mm
More than 25mm
Plug
Water storage pipe
6.2.7 Lifting pipe setting of indoor unit with water pump
 The length of lifting pipe should not exceed the pump head of indoor unit water pump.
Pump head of big four way cassette: 750mm
Pump head of compact four way cassette: 500mm
 The drainage pipe should be set down inclined after the lifting pipe immediately to avoid wrong
operation of water level switch.
 Refer the following picture for installation reference.
Flexible pipe 300mm
Hanger
A
A:Length of horizontal pipe ≤ 150mm
B: Lift height ≤ the pump head of water pump
Down incline pipe
B
6.2.8 Blowhole setting
 For the concentrated drainage pipe system, there should design a blowhole at the highest point of main
pipe to ensure the condensate water discharge smoothly.