manualshive.com logo in svg

North America Traffic RCF 2.4, Руководство по эксплуатации устройства

Поделиться
Скачать
North America Traffic RCF 2.4 Скачать руководство пользователя страница 8

 

    

7  

S

ECTION

 3  

3. 

Communication Link (Radio Transceiver)   

•  A Radio Transceiver is installed in each RCF 2.4 Unit in order for communication between trailers.
•  The Radio Transceiver is a 1 Watt system designed to communicate up to 1/2 mile (with line of 

sight).

•  The unit operates on the approved frequency range as per the MUTCD/FCC Part 90.17 - (910 MHz- 

917 MHz spread spectrum, frequency hopping) - No FCC licensing required. 

4. 

Folding Gate Arm

•  8 ft total boom extension
• Aluminum
•  5” vertical aspect (including foam gasket)
•  16” alternating red/white re

fl

 ective sheeting

•  Hinged design for compact storage
•  18” x 18” orange warning 

fl

 ag

• Breakaway Mechanism

5. 

Power Supply 

•  Power is supplied by four (4) – 6 Volt deep cycle batteries, in series to generate 24 VDC.
•  Batteries are charged using the 15 Amp smart charger (external plug provided near cabinet door 

providing easy access for connection to a 120 VAC source).

•  Batteries receive some assisted energy supplied by the Solar Panel attached – for more information 

see: 

Solar Panel

 feature in this section.

Note: For more detailed information pertaining to batteries, charger and solar array, refer to POWER 

SYSTEM INFORMATION S

ECTION

 13.

6. 

Trailer Section Components  

•  The Trailer Section for the RCF 2.4 is approved for use on highways including the following features: 

 

◦

Torsion axle, rated at 1100 lbs

 

◦

ST175/80R13 tires 

 

◦

Removable tongue with one (1) locking pin

 

◦

Four 

fl

 at-mount screw jacks to level and stabilize

 

◦

All electrical and lighting requirements for highway driving 

 

◦

2” Hitch Ball Coupler on tongue

 

◦

Hitch Adapter Transport Holder (hitch adapter sold separately)

 

◦

Three points of locking contact for locked, uni

fi

 ed tandem towing

•  The frame structure and all supports are welded and inspected by certi

fi

 ed welders, implemented 

under ISO 9001:2015 guidelines.

Содержание RCF 2.4
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды