33
Fiber-optic and IP expansion
Contents
This section contains information on the following topics:
"Small System expansion" (page 33)
"SSC card" (page 34)
"Fiber Expansion and IP Expansion daughterboards" (page 34)
"Fiber Receiver card" (page 35)
"Expansion scenarios" (page 35)
"Cabinet and Chassis system mix-and-match expansion" (page 43)
Small System expansion
Both the Cabinet system and the Chassis system support fiber-optic and IP
expansion. Up to four Expansion Cabinets or Chassis can be connected
to the Main with CAT5 or 100BaseF cable and located up to 3 km (1.8 mi)
from the Main. With the introduction of IP connectivity, IP expansion can be
distributed over a Campus Data Network.
For fiber-optic expansion, the following three basic components, in addition
to other hardware, are required:
•
Small System Controller (SSC) card in the Main
•
Fiber Expansion daughterboard
•
Fiber Receiver card in the Expansion
For IP expansion, the following three basic components, in addition to other
hardware, are required:
•
SSC card in the Main
•
IP Expansion daughterboards (minimum two)
•
SSC card in the Expansion
For a complete list of required hardware, refer to
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Overview
NN43011-110
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2003 - 2007, Nortel Networks
.
Содержание Succession 1000M
Страница 47: ......
