Nortel Succession 1000M, Обзор системы

Страница: 27 / 48

Installation and configuration 27
The Signaling Server for a CS 1000M Small System is installed separately.
Refer to Signaling Server: Installation and Configuration (NN43001-312)
for more information.
The Software Installation Program is automatically invoked during first-time
installation of the system. This menu-driven program installs the software
and makes the system operational.
Preprogrammed data
When you first install the system, you must enter customer data into the
overlay programs. For example, you must assign features to telephone keys
in order for those features to function correctly. Data can be preprogrammed.
If you load preprogrammed data during the installation process, the system
automatically configures some overlay entries on the telephones.
If the preprogrammed data does not apply to users at one site, you can
revise the data on-site with a TTY. You can also revise the preprogrammed
data remotely over a modem connection. You can start with a basic
configuration, which is the least possible amount of data required for initial
software programming. You must perform this step while you are working in
the Software Installation Program.
Model telephones
Small Systems offer a variety of preprogrammed model telephone layouts.
By using these telephone layouts (which serve as templates), technicians
can perform a few simple steps at installation to activate multiple telephones.
Administration telephone
If you use the default model layouts for telephones and trunk routes, you can
use an administrative telephone to make adjustments to items such as the
numbering plan and access codes. You do not need a TTY input terminal to
program a Small System unless a custom layout is used.
You can use a digital telephone for administrative functions. The
administrative telephone can double as a user’s working telephone.
Changing or removing preprogrammed data
If preprogrammed data does not apply to users at a particular site, data
can be revised on-site with a TTY or remotely over a modem connection.
If desired, the user can start with the minimal amount of data required for
initial software programming, which is the configuration record. This step
must be performed while the user is in the Software Installation Program.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Overview
NN43011-110 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2003 - 2007, Nortel Networks
.