Nortel Secure Router 4134, Быстрый старт

Страница: 34 / 70

34 Installing the Secure Router 4134 chassis and hardware components
Procedure steps
Step Action
1 Select one of the six possible rack-mounting positions on the
sides of the Secure Router 4134.
2 Use a #2 Phillips screwdriver to attach a bracket to the desired
mounting position on one side of the Secure Router 4134.
3 Torque the mounting bracket screws to 3 to 6 in-lb (0.339 to
0.6779 N-m).
4 Attach the second bracket to the corresponding position on the
opposite side of the Secure Router 4134.
--End--
Installing the chassis
Install the Secure Router 4134 in a standard equipment rack (19 in;
48.26 cm).
Average time to install the Secure Router 4134 chassis in an equipment
rack: 2 minutes.
ATTENTION
You must install the Secure Router 4134 in a restricted-access location. You
must limit access to the Secure Router 4134 to authorized service personnel
only.
ATTENTION
Nortel recommends that you install the chassis (including the power supplies
and fan tray) in the equipment rack before you install the ground lug and the
optional external interface modules.
WARNING
Do not install the Secure Router 4134 near a standing or
running water source or in a high-humidity environment.
WARNING
WARNUNG
Installieren Sie den Secure Router 4134 nicht in der Nähe von
stehenden oder fließenden Gewässern oder in einem Gebiet mit
sehr hoher Feuchtigkeit.
Nortel Secure Router 4134
Quick Start
NN47263-100 02.01 Standard
18 February 2008
Copyright © 2007, 2008 Nortel Networks
.