Nortel Passport 1424T, Инструкция по установке

Страница: 29 / 46

Chapter 3 Understanding the LEDs 29
Installing the Passport 1424T Series Layer 3 Switch
Figure 6 AC receptacle on the rear of the 1424T switch
After you power the switch up, the LED indicators should respond as described in
Table 1 .
Status LED
The
Status
LED lights when a remote management station initiates a console
management session over the switch’s RS-232 serial port.
Table 1 LED behavior
LED indicator Behavior
All LEDs Flashes momentarily to represent a system reset.
Power Remains on after the switch is powered up.
Console Flashes while the 1424T switch loads onboard software
and performs a self-test. It remains on if there is a
connection at the RS-232 port. Otherwise, this LED
indicator is off.
100M Depending on the transmission speed remains on or
turns off.