Nortel Norstar T7316E, Быстрое руководство по программированию

Страница: 24 / 42

S p e e d D i a l
24
SELECTING A LINE FOR THE NEW SPEED DIAL CODE
Only extensions where this line appears have access to this Speed Dial code.
CHOOSING THE SPEED DIAL DISPLAY FORMAT
PROGRAMMING A NAME FOR THE SPEED DIAL CODE
ACTION VISUAL DISPLAY
1. After programming the new exchange, as explained in the
previous section:
001:01912567843
CLR
CHANGE
2. Press
‘.
Use prime line
CHANGE
3. Press
CHANGE
repeatedly to scroll through the options ( Use
prime line , Use line: ___, Pool code _, and Use routing table ). In
this example, choose the prime line. Stop scrolling when this
comes back up on the display:
Use Lines ____
CHANGE
ACTION VISUAL DISPLAY
1. After choosing the line with the previous procedure, you can
choose to see either the extension number being dialled or a name
that you have chosen. The display shows:
Use prime line
CHANGE
2. Press
‘.
Display digits:Y
CHANGE
3. Press
CHANGE
to change between Y (see the extension number)
and N (to choose a name for the Speed Dial code).
Display digits:N
CHANGE
ACTION VISUAL DISPLAY
1. Press
‘.
This default name is displayed: Name:Sys Spd Di..
CHANGE
2. Press
CHANGE
. Name:__
--->
3. Press the number on the keypad that represents the first letter of the
name. Press the key repeatedly until the letter appears.
Example: for the name “Sutton,” press the keypad number 7
three times to display the letter “S”.
Press ---> to move to the next letter in the name.
Press # to enter a space.
Name:S__
<---
BKSP --->
4. Use the keypad and --> until the entire name is entered.
The name can be up to 16 characters long.
Name:Sutton
<---
BKSP --->
5. Press
‘
to continue programming. Name:Sutton
CLR
CHANGE