Nortel Norstar T7316E, Быстрое руководство по программированию

Страница: 16 / 42

L i n e A c c e s s
16
LINE APPEARANCES
With this setting, you can programme the number of appearances a DIA line is permitted at each
extension.
• Line appearances rely on the previously described line-assignment setting,
Ring Only , Appr&Ring or
Appr. only . If you choose Appr&Ring or Appr. only , there can be as many simultaneous DDI calls as
there are DIA key appearances. If Ring only is chosen, there can be as many simultaneous DDI calls
as there are intercom keys. At least one intercom key needs to remain open for outgoing calls.
• It is best to limit the number of line keys to four per extension. More line keys can be programmed
on any given extension by programming fewer on another extension. For example, choose this option
to programme 20 keys on an extension equipped with a Central Answering Position module.
ACTION VISUAL DISPLAY
1. Begin the session by following the instructions under "To
begin a programming session" on page 9 using the System
Administrator Plus password.
Terminals&Extns
2. Press
≠.
Show Extn#:
LIST
3. Enter the number of the extension that you want to programme.
Show Extn#:22_
BKSP LIST
We used extension 221 for this example.
221:221
COPY
FIND
4. Press
≠
Line access
COPY
5. Press
≠
twice. Show line ....
SCAN
LIST
6. Enter the line number. Line number 282 is used as an example.
Show line:282
SCAN
BKSP LIST
7. Press
SCAN
to see the setting.
L282:Appr&Ring
SCAN
FIND CHANGE
8. Press
≠.
Appearances:1
CHANGE
9. Press
CHANGE
.
Appearances:
CANCL
10. Enter 4. For our example, we have chosen to have DIA line 282
appear on extension 221 four times. Appearances:4
CANCL
BKSP OK
11. Press
OK
.
Appearances:4
CHANGE
12. Press
®
to exit the session.
End of session
13. After a few seconds, the date and time reappear on the display.
1 Jan 1:00 am