94
Modular ICS 6.1 Programming Record
P0603536 02
••• Name
If you choose No for display digits, enter 16 characters to identify the person
or location for a speed dial number. When the number is dialed, the telephone
displays the name, not the number. If you want to use the alpha tagging
feature, you must specify a name for the speed dial.
•• Bypass restr’n
Select whether a programmed system speed dial number can bypass
restrictions programmed for a line and/or a telephone.
Passwords
Use these commands to assign passwords to restrict access to programming
and system features.
• COS pswds
Create up to 100 six-digit passwords that control access and use of the
Norstar system by internal and remote users.
•• Show pswd#:_
Enter the two-digit Class of Service password number (00-99).
•• COS pswd #00
Indicates the number of the password to which you are assigning information.
••• Pswd 00
Enter a six-digit password.
••• User flt
Assign a restriction filter to the Class of Service password.
••• Line flt
Select whether a Class of Service password will use the default line filter or a
different line filter (enter the two-digit filter number).
••• Remote pkg
Select whether a Class of Service password will use the default remote
package or a different remote package (enter the two-digit remote package
number).
• Call log pswds
A programming section that allows you to clear any Call Log password
programmed with the Call Log feature.
•• Show set:_
Enter the DN of the telephone you want to program.
••• Log pswd
Erase the call log password for this telephone.
• Programing pswds
In this section you can create your own password rather than use the default.
•• Installer
Enter the new installer password which gives you access all the programming
settings.
•• S
Enter the new system coordinator password which gives you access to
selected programming settings.
•• Sys coord
Enter the new system coordinator password which gives you access to
everyday programming settings.
•• Basic
Enter the new basic password which gives you access to the most commonly
used programming settings.
• Reg pswd.
(MICS-XC only)
Enter the new registration password that allows you to register Companion
portable sets to the system.
• Hospitality
Use these commands to create Hospitality services passwords if required,
rather than use the defaults.
•• Desk pswd
Enter the new Desk password which gives access to all Hospitality services
programming settings.
•• Cond pswd
Enter a Condition password which gives certain employees access to the
Room condition programming settings in Hospitality services.
• SM password
Enter the password that the supervisor using Silent Monitoring will enter.
Содержание NORSTAR Modular ICS 6.1
Страница 8: ...viii Modular ICS 6 1 Programming Record P0603536 02...
Страница 115: ......
