54
While on an active call
Transferring a call
Use the Transfer feature to redirect a call to a third party.
1.
Press the Transfer key in the upper display
area. The other party is on hold and a dial
tone sounds. The LCD indicator light flashes
steadily.
2.
Dial the DN to which the call is to be transferred.
3.
When that number rings or a person answers,
announce the call and then press the Transfer
key to connect the calling party.
4.
To return to the original call, if the transfer is
incomplete, press the line (DN) key (next to the
LCD indicator) to reconnect to the original call.
Note: After screening the call, if the transferred
to party does not answer, press the Goodbye
key and then press the flashing extension.
Using the Call Park feature
Use the Call Park feature to hold temporarily (park) and retrieve a call from
any telephone. Using Call Park does not tie up a line.
1.
To park a call to another extension, during an
active call, press the Park key in the upper
display area.
2.
Look at the display. A System Park extension is
displayed. Take a note of the number.
3.
Press the Park key.
4.
Go to any phone and retrieve the call by dialing
the System Park number that was displayed.
Carrier VoIP
Nortel IP Phone 2002 User Guide
NN10300-007
06.04
Standard
(I)SN09U
20 October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Содержание Networks IP Phone 2002
Страница 1: ...Carrier VoIP Nortel IP Phone 2002 User Guide NN10300 007...
Страница 71: ......