Nortel MOG6xx, Руководство по установке и настройке

Страница: 63 / 120

63
WLAN Handsets 2210/2211 configuration
IP Address menu
There are two modes in which the wireless handset can operate: DHCP-enabled or Static IP. Select
the mode for operation from the IP Address menu:
•
* Use DHCP – use DHCP to assign an IP address each time the wireless handset is turned on.
If DHCP is enabled, the wireless handset also receives all other IP address configurations from
DHCP.
• Static IP – allows a fixed IP address to be manually configured. If this option is selected, the
wireless handset prompts for the IP addresses of each configurable network component. When
entering IP addresses, enter the digits only, including leading zeroes. No periods are required.
Regardless of the mode in which the wireless handset is operating, the following components must
be configured:
•
Phone IP – the IP address of the wireless handset. This is automatically assigned if DHCP is
used. If using Static IP configuration, obtain a unique IP address for each wireless handset
from the network administrator.
• SVP Server IP – the IP address of the master of the WLAN IP Telephony Manager 2245
group. If using Static IP configuration, this is simply the IP address of the WLAN IP
Telephony Manager 2245. The WLAN IP Telephony Manager 2245 must be statically
configured to have a permanent IP address. If DHCP is being used, the wireless handset will
try the following, in order:
Restore Defaults
Site Survey Mode
Regulatory Domain
Security * None
WEP Authentication Open System Shared Key
WEP On/Off
Key Information Default Key
Key Length
Key 1 – 4
Rotation Secret
Cisco FSR Username
Password#
Terminal type i2004
3rd party
OAI on/off Enable OAI
Disable OAI
Admin PW
Table 6 Admin Menu options (Sheet 2 of 2)
Admin menu
option
2nd level 3rd level 4th Level