Nortel ISDN Signaling Link, Описание, установка и эксплуатация

Страница: 267 / 380

OA&M using MAT applications Page 267 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Use the MAT ITG menu
Configuration | Synchronize | Retrieve
command
to retrieve the ITG configuration information from the ITG node.
1 Launch MAT and double-click the ITG ISDN IP Trunks icon from the
Services folder. The IP Telephony Gateway - ISDN IP Trunk window
opens.
2 Select Leader 0 or any card from the node.
3 Select menu Configuration | Synchronize | Retrieve. The ITG -
Retrieve Options window appears.
4 Check the boxes for the ITG configuration data that you need to
retrieve:
Note 1: Select Node Properties, Card Properties, and Dialing Plan
if the MAT ITG data is out of date and you intend to synchronize all
MAT ITG node data with the data from the ITG cards on the node.
Note 2: Select Card Properties to add a node on MAT by retrieving
from an existing node that contains more than one card.
Note 3: Select any combination of check boxes as indicated by
problem symptoms when you are attempting to isolate a problem on a
particular card. Use the “dummy” node for this purpose.
5 Select Prompt user for community name if required.
6 Click the Start retrieve button.
Monitor the status of the retrieval in the Retrieve control box. The retrieved
Node Properties , Card Properties , and Dialing Plan will over-write the
existing MAT ITG configuration data for the respective node or card.
When you retrieve a dialing plan table, MAT ITG compares it against the
existing node dialing plan and discards it if it is identical. If it is different, you
are asked to confirm before it over-writes the existing node dialing plan on
MAT ITG.
The “Retrieving the ITG configuration information from the ITG node”
procedure is complete.