Nortel ISDN Signaling Link, Описание, установка и эксплуатация

Страница: 180 / 380

Page 180 of 378 Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
MODE
ISLD
Mode of Operation.
Route uses ISDN Signaling Link in dedicated
mode.
Note: ISLD is allowed when ISDN = YES and the ISL
package 147 is equipped. ISLD is allowed only on ISA
and TIE trunks.
DCH xxx D-channel number, where:
x = 0-255 for Large Systems.
x = 0-79 for Small Systems.
IFC SL1
ESGF
ISGF
Meridian Customer Defined Network (MCDN) is
required for Small Systems.
ESIG interface with GF platform (QSIG)
ISIG interface with GF platform (QSIG)
The IFC of the route data block must match the
IFC of the ISL D-Channel in the configuration
record
PNI (0) - 32700 Private Network Identifier. You must configure the
PNI to 1 or other non-zero value to support
Meridian Customer Defined Network (MCDN)
features that use non-call-associated signaling.
For example, Network Ring Again (NRAG)
Network Message Services (NMS), Network ACD
(NACD). Each feature needs ISDN signaling to be
sent across the Meridian 1 network in the absence
of a call.
Note: The PNI in the customer data block must be the
same as the PNI configured in the route data block at the
far end for outgoing calls from the far-end toward this
Meridian 1 node.
NCNA (YES) NO Network calling name allowed
NCRD (NO) YES Network Call Redirection allowed
Table 34
LD 16 - Configure the ITG ISL TIE Trunk route data block (Part 2 of 4)
Prompt Response Description