Nortel HomeOffice II, Руководство пользователя

Страница: 118 / 214

100 Meridian HomeOffice II
Maintenance Standard 01.02
Overview
Introduction
This topic describes the MMI’s DISPLAY commands. Use the DISPLAY
commands to display configuration settings and activity information for the
HLC into which you are logged. For example, the values displayed by the
DISPLAY REMOTE command are configured using the SET REMOTE
command. (See “SET (S) commands” on page 111.)
DISPLAY CONFIG (D C)
The DISPLAY CONFIG or D C command displays the configuration settings of
the HLC.
DISPLAY ECHO (D E)
The DISPLAY ECHO or D E command displays the echo canceling settings of
all channels on the HLC.
DISPLAY ONOFFTABLE (D O)
The DISPLAY ONOFFTABLE or D O command displays the Online/Offline
table, which is the schedule of times during the week at which the home office
site using the specified channel has primary access to that channel’s ISDN
connection.
DISPLAY PHONE (D P)
The DISPLAY PHONE command displays the following characteristics of the
telephones served by the HLC:
■
phone type: cordless or corded
■
indicator update status: enabled or disabled
DISPLAY REMOTE (D R)
The DISPLAY REMOTE or D R command displays the remote numbers of all
home offices served by the HLC.