7
Logging in to your mailbox
To log in to your CallPilot mailbox, you need the CallPilot multimedia messaging access
number, and your own mailbox number and password.
Your administrator gives you these numbers and any other numbers you need for
CallPilot features and services. Keep a handy record of these numbers in Your CallPilot
numbers, page 31.
To log in for the first time
Your administrator will give you a temporary password that you change the first time you
log in.
1
Decide on a new password. See Changing your password, page 8.
2
Follow the login steps below, using your temporary password.
3
When you are asked to enter a new password, follow the prompts. See Changing
your password, page 8.
To log in
You can log in to your mailbox from any touchtone telephone. When logging in from your
own telephone, you may be able to press a message key instead of dialing the access
number.
1
Dial the CallPilot multimedia messaging access number, or press the message
key on your telephone.
2
Enter your mailbox number, then press #. Or, at your own telephone, just press #.
3
Enter your password, then press #.
You are now in your mailbox and can use all the message list commands.
To log in using Autologin
Autologin is an option that makes login easier because you don’t have to enter your
mailbox and password. Your administrator can allow secure numbers such as your
office or home telephone for Autologin. See Turning Autologin on or off, page 10.
To access your mailbox when Autologin is turned on, dial the CallPilot access number or
press the message key at one of your specified Autologin numbers.
To disconnect
When you have finished your CallPilot session, press 8 3 to disconnect, or hang up.
