Nortel BCM50a Скачать руководство пользователя страница 305

Страница: 305 / 315

Appendix J Log descriptions

305

BCM50a Integrated Router Configuration — Advanced

Log commands

Go to the command interpreter interface (see

Appendix G, “Command

Interpreter” on page 241

for information on how to access and use the

commands).

Certificate decoding failed.

Certificate was not found (anywhere).

Certificate chain looped (did not find trusted root).

Certificate contains critical extension that was not handled.

Certificate issuer was not valid (CA specific information missing).

(Not used)

CRL is too old.

CRL is not valid.

CRL signature was not verified correctly.

CRL was not found (anywhere).

CRL was not added to the cache.

CRL decoding failed.

CRL is not currently valid, but in the future.

CRL contains duplicate serial numbers.

Time interval is not continuous.

Time information not available.

Database method failed due to timeout.

Database method failed.

Path was not verified.

Maximum path length reached.

Table 79

Certificate path verification failure reason codes

Code

Description

Содержание BCM50a




























































































































































































































































































































Результаты поиска

Содержание BCM50a

Отзывы:

Nortel BCM50a, Руководство по настройке, Страница: 305 / 315

Результаты поиска

Содержание BCM50a

Отзывы: