Nortel BCM50a, Руководство по настройке

Страница: 191 / 315

Chapter 18 Call scheduling 191
BCM50a Integrated Router Configuration — Advanced
If a connection is already established, your BCM50a Integrated Router does not
drop it. After the connection is dropped manually or it times out, then that remote
node cannot be triggered until the end of the
Duration .
Table 41 Menu 26.1 Schedule Set Setup
Field Description Example
Active Press [SPACE BAR] to select Yes or No . Choose Yes and
press [ENTER] to activate the schedule set.
Yes
Start Date Enter the start date when you wish the set to take effect in
year-month-date format. Valid dates are from the present to
2036-February-5.
2000-01-01
How Often Press the [SPACE BAR] and then [ENTER] to select Once
or Weekly . Both these options are mutually exclusive. If
Once is selected, then all weekday settings are N/A . After
Once is selected, the schedule rule deletes automatically
after the scheduled time elapses.
Once
Once:
Date If you selected Once in the How Often field above, enter
the date the set should activate here in year-month-date
format.
2000-01-01
Weekday:
Day If you selected Weekly in the How Often field above, select
the days when the set should activate (and recur) by going
to that days and pressing [SPACE BAR] to select Yes .
After you complete this menu, press [ENTER] to exit.
Yes
No
N/A
Start Time Enter the start time when you wish the schedule set to take
effect in hour-minute format.
09:00
Duration Enter the maximum length of time this connection is
allowed, in hour-minute format.
08:00
Action Forced On means that the connection is maintained
whether or not there is a demand call on the line and
persists for the time period specified in the Duration field.
Forced Down means that the connection is blocked
whether or not there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits
a demand call on the line. Disable Dial-On-Demand
means that this schedule prevents a demand call on the
line.
Forced On
After you complete this menu, press [ENTER] at the prompt “Press ENTER to Confirm…”
to save your configuration, or press [ESC] at any time to cancel.