Nortel BCM50 3.0 Скачать руководство пользователя страница 24

Страница: 24 / 46

Chapter 3 Hardware installation

NN40020-308

To verify the MBM switches

Verify that the 6-pin dip switch is set to on for all MBMs that have the 6-pin dip switch.

To install a global analog trunk module (GATM):

For the dip switches on the left side, at the rear of the module, set all the switches to on.

For the dip switches on the right side, at the rear of the module (country profile switches),
set all the switches to off. The GATM automatically downloads the country profiles.

To install a global analog station module 8 (GASM8):

For the dip switches on the left side, at the rear of the module, set all the switches to on.

For the dip switches on the right side, at the rear of the module, set the switches according
to the table

GASM8 dip switch settings (switches 1–3)

on page 24 and the table

GASM8

regional dip switch settings (switches 4–8)

on page 24.

To install an MBM in an expansion unit

Attach one end of a grounding strap to your wrist and the other end to a grounded metal
surface.

With the face of the MBM toward you, insert the MBM into the expansion unit.

Table 10

GASM8 dip switch settings (switches 1–3)

Switch

Description

Setting

Switch 1

Firmware download capability

OFF—Standard mode (firmware downloading not
supported)

ON—Enhanced mode (firmware downloading supported)

Switch 2

To download the firmware from
the BCM50 (for enhanced
mode only)

OFF—if you want the GASM8 to download the firmware
when the firmware version in the BCM50 is different than the
version in the GASM8 (default)

ON—if you want the GASM8 to download the firmware in
the event of a BCM50 cold start

Switch 3

Enable/disable echo
cancellation

OFF—Enables echo cancellation (default)

ON—Disables echo cancellation

Table 11

GASM8 regional dip switch settings (switches 4–8)

Switches 4 to 8 select the region for the GASM8 as follows:

Switch 4

Switch 5

Switch 6

Switch 7

Switch 8

North America

OFF

United Kingdom

OFF

Australia

OFF

Poland

OFF

Note:

When switch 1 is ON (enhanced mode), an available regional profile will be downloaded and override

the regional dip switch settings.

2 minutes

Содержание BCM50 3.0















































Результаты поиска

Содержание BCM50 3.0

Отзывы:

Похожие инструкции для BCM50 3.0

Бренды по названию

Популярные бренды

Nortel BCM50 3.0, Быстрый старт

Результаты поиска

Содержание BCM50 3.0

Отзывы:

Похожие инструкции для BCM50 3.0

Бренды по названию

Популярные бренды