Nortel BayStack 660, Руководство пользователя

Страница: 62 / 163

Using the BayStack 660 Wireless LAN Access Point
4-6
203939-B
The AP Manager window provides the menus and commands shown in Table 4-1 .
Configuring an Individual Access Point
After the AP Manager software is loaded and the access point has been assigned
an IP address, you should configure the access point. Access points “discovered”
on the subnet are displayed in the Access Point dialog box (
Figure 4-4 ). Note: It
may take a few seconds for your access point to display.
Note:
If this is the first time you have opened the AP Manager, an IP address
request window may open. Go to “Adding a New IP Address” on page 4-3 for
more information.
Table 4-1. AP Manager Menus and Commands
Items Command Description
File Exit Closes the AP Manager.
Edit Groups
Adapter List Creates and edits Groups.
Creates and edits Adapter Lists.
Configure Quick list
Group
Access Points Configures access points assigned to the quick list.
Configures access points assigned to a group.
Configures access points.
Actions Quick list
Group
Access Points
Performs actions on access points assigned to the
quick list.
Performs actions on access points assigned to a group.
Performs actions on an access point.
View Activity Displays the activity of an access point.
Tools Access Point
Find Listed
Adapter
Find Adapter
WEP
BOOTP Displays the status of access points.
Finds an adapter assigned to the adapter list.
Finds an adapter.
Configures WEP security for an access point.
Edits the BOOTP table.
Help About Displays the version of the AP Manager program.
book.fm Page 6 Wednesday, September 22, 1999 1:41 PM