Nortel BayStack 410 24T, Инструкция по использованию

Страница: 157 / 310

Using the Console Interface
309985-B Rev 00
3-19
Table 3-5. Switch Configuration Menu Screen Options
Option Description
MAC Address Table Displays the MAC Address Table screen (see “MAC Address Table ” on
page 3-20 ). This screen allows you to view all MAC addresses and
their associated port or trunk that the switch has learned, or to search
for a particular MAC address (to see if the switch has learned the
address).
MAC Address-Based Security...
Displays the MAC Address Security Configuration Menu (see “MAC
Address-Based Security ” on page 3-22 ). This menu provides the
following options: MAC Address Security Configuration, MAC Address
Security Port Configuration, MAC Address Security Port Lists, MAC
Address Security Table, and Return to Switch Configuration Menu
screen. This menu allows you to set up your MAC address-based
security for your switch.
VLAN Configuration... Displays the VLAN Configuration Menu (see “VLAN Configuration
Menu ” on page 3-38 ). This menu provides the following options: VLAN
Configuration, VLAN Port Configuration, VLAN Display by Port, Traffic
Class Configuration, and Return to Switch Configuration Menu
screen. This menu allows you to create and modify VLANs.
Port Configuration... Displays the Port Configuration screen (see “Port Configuration ” on
page 3-52 ). This screen allows you to configure a specific switch port,
all switch ports or, when in a stack configuration, all stack ports.
High Speed Flow Control
Configuration...
Only appears when a gigabit MDA is installed in one of the units of a
stacked configuration. When the gigabit MDA is installed, selecting
this option displays the High Speed Flow Control Configuration screen
(see
“High Speed Flow Control Configuration ” on page 3-54 ).
MultiLink Trunk Configuration...
Displays the MultiLink Trunk Configuration Menu (see “ MultiLink Trunk
Configuration ” on page 3-57 ). This menu provides the following
options: MultiLink Trunk Configuration, MultiLink Trunk Utilization, and
Return to Switch Configuration Menu. This menu allows you to create
and modify trunks, and to monitor the bandwidth utilization of
configured trunks.
Port Mirroring Configuration... Displays the Port Mirroring Configuration screen (see “ Port Mirroring
Configuration ” on page 3-64 ). This screen allows you to designate a
single switch port as a traffic monitor for up to two specified ports or
addresses.
Rate Limiting Configuration... Displays the Rate Limiting Configuration screen (see “ Rate Limiting
Configuration ” on page 3-68 ). This screen allows you to limit the
forwarding rate of broadcast and multicast packets.
(continued)