8005DC power supply
27
Redundant power configuration
If a chassis has a redundant power configuration and one power supply
fails, the chassis continues to operate with no interruption of service.
The chassis continues to supply the same module output power with the
remaining power supplies. A trap and syslog message indicates that the
configuration is non-redundant. Nortel recommends that you operate the
Ethernet Routing Switch 8600 system in a redundant configuration at all
times to ensure maximum network performance.
ATTENTION
A redundant power supply prevents the failure of another power supply in the
system.
If a chassis has the minimum power supply configuration and one power
supply fails, the system loses power and network connectivity.
8005DC power supply
Each 8005DC power supply provides 1462 W of power to the switch.
Figure 2 "8005DC power supply" (page 27)
shows the 8005DC power
supply used in the 8006, 8010, and 8010co chassis.
Figure 2
8005DC power supply
Nortel Ethernet Routing Switch 8600
Installation — DC Power Supply
NN46205-307
02.02
19 December 2008
Copyright © 2008 Nortel Networks
.
Содержание 8004DC
Страница 69: ......
