Nortel 4526FX Скачать руководство пользователя страница 50

Страница: 50 / 196

Chapter 2 Configuring Quality of Service (QoS) with the CLI

no qos if-assign [port

<portlist>]

Substitute

port <portlist>

above with the ports to delete from the

interface group.

The

no qos if-assign

command is executed in the Interface

Configuration command mode.

qos if-group command

The

qos if-group

command creates interface groups.

The syntax for the qos if-group command is

qos if-group name <WORD>

class <trusted |

untrusted | unrestricted>

"qos if-group parameters" (page 50)

outlines the parameters for this

command.

qos if-group parameters

Parameter

Description

name <WORD>

Enter the name of the interface group; maximum is 32
US-ASCII. Name must begin with a letter a..z or A..Z.

class field; QoS:
trusted ports;
QoS:untrusted ports;
QoS: unrestricted
ports; interfaces;
QoS:interfaces class
<trusted | untrusted |
unrestricted>

Defines a new interface group and specifies the class
of traffic received on interfaces associated with this
interface group:

•

trusted

•

untrusted

•

unrestricted

The

qos if-group

command is executed in the Global Configuration

command mode.

no qos if-group command

The

no qos if-group

command deletes interface groups.

The syntax for the no qos if-group command is

no qos if-group name

<WORD>

Substitute

<WORD>

above with the name of the interface group to delete.

The

no qos if-group

command is executed in the Global Configuration

command mode.

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service

NN47205-504 (322816-

)

03.01

Standard

5.1

23 November 2007

Содержание 4526FX




































































































































































































Результаты поиска

Содержание 4526FX

Отзывы:

Nortel 4526FX, Конфигурация, Страница: 50 / 196

Результаты поиска

Содержание 4526FX

Отзывы: