Nortel 4526FX, Конфигурация, Страница: 49 / 196

Configuring QoS Interface Groups 49
qos queue-set-assignment parameters
Parameter Description
1p <0-7>
Enter the 802.1p priority value for which the queue
association is being modified; range is between 0 and 7.
queue <1-4>
Enter a number from 1 to 4 to specify the queue within
the identified queue set to assign the 802.1p priority
traffic at egress.
The
qos queue-set-assignment
command is executed in the Global
Configuration command mode.
Configuring QoS Interface Groups
Ports can be added or deleted to or from an interface group or add or
delete the interface groups themselves. This section covers the following
CLI commands.
qos if-assign command
The
qos if-assign
command adds ports to a defined interface group.
The syntax for the qos if-assign command is
qos if-assign [port <portlist>] name [<WORD>]
"qos if-assign parameters" (page 49) describes the parameters for this
command.
qos if-assign parameters
Parameter Description
port <portlist> Enter the ports to add to interface group.
name <WORD> Specify name of interface group.
The
qos if-assign
command is executed in the Interface Configuration
command mode.
ATTENTION
The system automatically removes the port from an existing interface group to
assign it to a new interface group.
no qos if-assign command
The
no qos if-assign
command deletes ports from a defined interface
group.
The syntax for the no qos if-assign command is
Nortel Ethernet Routing Switch 4500 Series
Configuration — Quality of Service
NN47205-504 (322816- B ) 03.01 Standard
5.1 23 November 2007
Copyright © 2007, Nortel Networks
.