manualshive.com logo in svg

Nortel 2220, Руководство по эксплуатации продукта

Поделиться
Скачать
Nortel 2220 Скачать руководство пользователя страница 29

Chapter 3 System Configuration

29

Using the Nortel Networks Wireless LAN Access Point 2220/2221

 

Channel 

802.11a

Enable: Check this box to enable the 802.11a radio of your Access Point 2220/
2221. By default the radio is not enabled.

802.11a Turbo Mode: When turbo mode is enabled, the Access Point 2220/2221 
operates with a data rate of up to 108 Mbps. By default, turbo mode is disabled, 
and the Access Point 2220/2221 operates at a data rate of up to 54 Mbps. When 
you select Turbo Mode, the Access Point 2220/2221 uses two adjacent 802.11a 
channels to achieve the bandwidth.

802.11a Radio Channel: If auto channel select is not enabled, this option allows a 
specific channel to be selected.

Auto Channel Select: Selecting “Enable” allows for automatic radio channel 
detection. Automatic radio channel detection only occurs at boot-up. (Default: 
“Enable”)

802.11b

Enable: Check this box to enable the 802.11b radio of your Access Point 2220/
2221. By default the radio is not enabled.

Note: 

Both 802.11a and 802.11b radios are turned off on your Nortel 

Networks Wireless LAN Access Point 2220/2221. You must configure 
your Access Point 2220/2221 for your country before turning on the 
802.11a and 802.11b radios.
For information on country-specific configuration, refer to 
Country-specific Configuration for the Nortel Networks Wireless LAN 
Access Point 2220/2221 (part number 215293-B). Go to 
http://support.nortelnetworks.com/, select “Wireless LAN” and then 
“WLAN Access Point 2220” or WLAN Access Point 2221”.

Note: 

The use of Turbo Mode is not allowed in all regions. Before 

enabling Turbo Mode, verify that Turbo Mode is allowed under your 
current local regulations.

Содержание 2220





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды