manualshive.com logo in svg

Nortel 2220, Руководство по эксплуатации продукта

Поделиться
Скачать
Nortel 2220 Скачать руководство пользователя страница 2

2

214853-B

 

Copyright © 2003 Nortel Networks

All rights reserved. June 2003.

 

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, 
whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher.

Windows 98SE/2000/ME/XP are trademarks of Microsoft Corp. 

Pentium is a trademark of Intel. 

Nortel Networks and the Nortel Networks logo are trademarks of Nortel Networks, Inc.

Multi-Region Product Documentation

This document may describe features that are not available in your region due to local regulations.

This document describes the use of the 802.11a radio. This feature is unavailable in Israel, Greece and Spain due to local 
regulations.

Compliances

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with instructions, may cause harmful and, if not installed and used in accordance with instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur 
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:

•

Reorient the receiving antenna

•

Increase the separation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

•

Consult the dealer or an experienced radio/TV technician for help

FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to 
computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

European Community Notice

Marking by the symbol

 indicates compliance with the Essential Requirements of the R&TTE 

Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards:

EN 301 893, EN 301 489-17, EN 60950, ETS 300 328-2

This device should not be operated in 802.11a mode in the following European Community countries: Greece and 
Spain. The radio spectrum authorities in these countries do not currently allow operation of this radio device in the 
5GHz bands. 

Содержание 2220





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды