Nortel 1000E PRI, Руководство по установке и пусконаладке

Страница: 101 / 162

Configure E1/T1 ports on a Call Server 101
Prompt Response Description
TN l ch Terminal Number for digital trunks where l = loop,
ch = channel.
DES PRI Designator field for trunk.
PDCA (1) - 16 Pad category table number.
PCML A
MU Pulse Code Modulation Law. Enter the appropriate value,
based on which companding law is being used on the
system.
A = A-Law
MU = Mu-Law
... ...
RTMB 0-511 1-4000 Route number and Member Number.
Range is the same as that for CS 1000E system.
... ...
MNDN xxx..x One seven-digit manual directory number.
TGAR 0 - (1) - 31 Trunk Group Access Restriction.
The default value (1) automatically blocks direct access.
... ...
CLS
aaaa
Class of Service.
... ...
--End--
Procedure 30 “Reconfiguring existing Dchannels on an NTBK51AA/NTBK5
1CA” (page 101)
describes how to change the protocol on an established
D-channel using LD 22, LD 96 and LD 17. Procedure 31 “Changing the
protocol on an established D-channel using Element manager” (page
102)
describes how to use Element Manager to change the protocol on
an established D-channel.
Procedure 30
Reconfiguring existing Dchannels on an NTBK51AA/NTBK51CA
Step Action
1 Log on to the CS 1000E.
2 Enter the command:
LOGI
System response: USERID?
3 Enter the username.
System response: PASS?
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.