102
Configure an E1/T1 card
4
Enter the password.
5
To access LD 22, enter:
LD 22
6
Determine the MSDL which hosts the D-Channel to be changed.
7
At the prompt, enter:
prt
System response: TYPE
8
Enter:
adan dch x
Where x is the D-Channel number
System response: MG_CARD x y z
Where x = loop, y = shelf, z = card
9
Enter:
End
10
Access LD 96 and enter the command:
LD 96
11
Enter:
dis msdl x y z all
Where x, y, and z are the values returned in LD 22
12
Exit LD 96.
13
Make the required changed to the D-Channel in LD 17.
14
Access LD 96 and enter:
enl msdl x y z all
Where x, y, and z are the values returned in LD 22
--End--
Procedure 31
Changing the protocol on an established D-channel using Element manager
Step
Action
1
Log on to Element Manager.
2
In the sidebar, click on the Routes and Trunks » D-Channels
link.
The D-Channel property page appears.
3
Click on the EDIT button beside the D-Channel you want to
change.
The property page for the D-channel appears.
4
Note the Media Gateway Card (MG_CARD) value.
5
Return to the Routes and Trunks » D-Channels page.
6
Click the MSDL Diagnostics (LD 96) link.
The MSDL Diagnostics page appears.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01
4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.
Содержание 1000E PRI
Страница 161: ......
