Nortel 1000E PRI, Руководство по установке и пусконаладке

Страница: 100 / 162

100 Configure an E1/T1 card
Prompt Response Description
CUST xx Customer number, as defined in LD 15.
ROUT 0 - 511 Route number. Range is the same as for Large System
and CS 1000E system.
DES DPNSS/
DASS Designator (up to 16 alphanumeric characters)
... ...
TKTP IDA Trunk type – integrated digital access trunks
SIGL DPN/DAS DPN = DPNSS signaling
DAS = DASS signaling
... ...
ICOG
xx
Either incoming, outgoing, or both way trunks.
SRCH (LIN) RRB Search method for outgoing trunk member.
ACOD
xxx..x
One seven-digit access code for the trunk route.
TARG 0-(1)-31 Trunk Access Restriction Group Number.
--End--
Configure PRI, PRI2 and DPNSS trunks
Procedure 29 “Configuring PRI and PRI2 trunks with Trunk Data Block
data using LD 14” (page 100)
describes how to configure the Trunk Data
Block data required for PRI and PRI2 trunks.
Procedure 29
Configuring PRI and PRI2 trunks with Trunk Data Block data using LD 14
Step Action
1 Log on to the CS 1000E.
2 To access LD 14, enter:
LD 14
3 Enter the responses shown in Table 30 "Trunk Data Block data
for PRI and PRI2 trunks (LD 14)" (page 100) .
Table 30
Trunk Data Block data for PRI and PRI2 trunks (LD 14)
Prompt Response Description
REQ
aaa
Request (aaa = CHG, NEW)
TYPE
xx
Trunk data block.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.