Wired Controller WRC2
25
setting the Filter function timer. The
icon will then stop blinking. The
controller will NOT start over at zero. The new setting MUST be greater than
the existing setting, or the
icon will continue to blink.
④
. After cleaning the filter, the Filter function must be cancelled to stop the
icon from blinking. Set the Timer area digit to
“00”, and press Enter/Cancel to
confirm the setting. After the cancel Filter function is confirmed, the controller
will be rest to zero operation hours.
⑤
. Set the Filter function timer again for the next cleaning as listed above.
3.18 Quiet Function Setting
Press the Function button to set Quiet function. With the QUIET icon flashing,
press the Enter/Cancel button to activate it.
To cancel the Quiet function, press the Function button, then press Enter/Cancel.
How to set Quiet function is shown in the Fig. 25
Fig. 25 Quiet function setting
Notes:
①
. Quiet function is unavailable in Fan or Dry mode. After a power failure, the
Quiet function will be deactivated and will need to be reset.
