Wired Controller WRC2
24
icon flashing. Press ▲ and ▼ to adjust till “00” is shown in the timer area. Then press
the Enter/Cancel button.
If the Filter function has been set correctly, the
icon will be displayed.
How to set Filter function is shown in the Fig. 24:
Fig. 24 Filter Setting
Notes:
①
. The Filter function timer can be changed at a later time after the timer has
been initially set. The controller will NOT start over at zero, but continue from
the current operation hours. Follow the steps listed above for setting the Filter
function timer.
②
. Once the set operation hours have been reached, the
icon will blink
every 0.5s to remind user to clean the filter.
③
. Once the
icon begins to blink, the end user can still reset the Filter
function timer to extend the operation hours. Follow the steps listed above for
