Nortek PPH3RE Series, Руководство по установке

Страница: 3 / 24

3
IMPoRtAnt SAFEtY InFoRMAtIon
Please read all instructions before servicing this equipment.
Pay attention to all safety warnings and any other special
notes highlighted in the manual. Safety markings are
used frequently throughout this manual to designate a
degree or level of seriousness and should not be ignored.
WARnIng
indicates a potentially hazardous situation that
if not avoided, could result in personal injury or death.
cAutIon indicates a potentially hazardous situation that
if not avoided, may result in minor or moderate injury or
property damage.
WARnIng:
ElEctRIcAl SHocK, FIRE oR
EXPloSIon HAZARD
Failure to follow safety warnings exactly could
result in serious injury or property damage.
Improper servicing could result in dangerous
operation, serious injury, death or property
damage.
• Before servicing, disconnect all electrical power
to the indoor blower.
• When servicing controls, label all wires prior
to disconnecting. Reconnect wires correctly.
• Verify proper operation after servicing.
WARnIng:
these units are fully charged with R-410A
refrigerant and ready for installation. When
a system is installed according to these
instructions, no refrigerant charging is required.
If repairs make it necessary for evacuation and
charging, it should only be attempted by qualified,
trained personnel thoroughly familiar with this
equipment. Some local codes require licensed
installation service personnel to service this
type of equipment. under no circumstances
should the homeowner attempt to install and/or
service this equipment. Failure to comply with
this warning could result in equipment damage,
personal injury, or death.
WARnIng:
Do not place combustible material on or against
the unit cabinet. Do not place combustible
materials, including gasoline and any other
flammable vapors and liquids, in the vicinity of
the unit.
WARnIng:
PRoPoSItIon 65 WARnIng: this product
contains fiberglass wool, a product known to the
state of california to cause cancer. Disturbing
the insulation of this product during installation,
maintenance, or repair will expose you to
fiberglass wool.
• Breathing this material may cause respiratory
irritations or may cause lung cancer.
• Fiberglass wool may also cause eye irritation,
skin sensitization, or other allergic responses
in susceptible individuals.
• Always wear goggles, disposable gloves,
long sleeved shirt, and appropriate breathing
protection when working near this insulation.
If contact with skin occurs, wash immediately
with soap and water. In case of contact with
eyes, flush immediately with water for at least
15 minutes. contact a physician if needed.
WARnIng:
the information listed below and on the next
page must be followed during the installation,
service, and operation of this unit. unqualified
individuals should not attempt to interpret these
instructions or install this equipment. Failure
to follow safety recommendations could result
in possible damage to the equipment, serious
personal injury or death.
• Before beginning the installation, verify that the unit
model is correct for the job. The unit model number is
printed on the data label.
• This equipment contains liquid and gaseous refrigerant
under high pressure. Installation or servicing should only
be performed by qualified trained personnel thoroughly
familiar with this type equipment.
• Installation of equipment may require brazing operations.
Installer must comply with safety codes and wear
appropriate safety equipment (safety glasses, work
gloves, fire extinguisher, etc.) when performing brazing
operations.
• The installer should become familiar with the units wiring
diagram before making any electrical connections to the
unit. See the unit wiring label or
Figure 9 (page 19) ,
Figure 10 (page 20) , & Figure 11 (page 21) .
• Follow all precautions in the literature, on tags, and
on labels provided with the equipment. Read and
thoroughly understand the instructions provided with
the equipment prior to performing the installation and
operational checkout of the equipment.
• Use caution when handling this appliance or removing
components. Personal injury can occur from sharp metal
edges present in all sheet metal constructed equipment.