Nortek P7RE Series, Руководство по установке

Страница: 3 / 20

3
iMPortant SaFetY inForMation
Please read all instructions before servicing this equipment.
Pay attention to all safety warnings and any other special
notes highlighted in the manual. Safety markings are
used frequently throughout this manual to designate a
degree or level of seriousness and should not be ignored.
Warning
indicates a potentially hazardous situation that
if not avoided, could result in personal injury or death.
caution indicates a potentially hazardous situation that
if not avoided, may result in minor or moderate injury or
property damage.
Warning:
electrical Shock, Fire or
eXPloSion haZard
Failure to follow safety warnings exactly could
result in serious injury or property damage.
improper servicing could result in dangerous
operation, serious injury, death or property
damage.
• Before servicing, disconnect all electrical power
to the indoor blower.
• When servicing controls, label all wires prior
to disconnecting. reconnect wires correctly.
• Verify proper operation after servicing.
Warning:
these units are fully charged with r-410a
refrigerant and ready for installation. When
a system is installed according to these
instructions, no refrigerant charging is required.
if repairs make it necessary for evacuation and
charging, it should only be attempted by qualified,
trained personnel thoroughly familiar with this
equipment. Some local codes require licensed
installation service personnel to service this type
of equipment. under no circumstances should
the equipment owner attempt to install and/or
service this equipment. Failure to comply with
this warning could result in equipment damage,
personal injury, or death.
caution:
this unit uses r-410a refrigerant. do not use
any other refrigerant in this unit. use of another
refrigerant will damage the unit.
Warning:
the information listed below must be followed
during the installation, service, and operation
of this unit. unqualified individuals should not
attempt to interpret these instructions or install
this equipment. if you do not posses mechanical
skills or tools, call your local dealer for assistance.
Failure to follow safety recommendations could
result in possible damage to the equipment,
serious personal injury or death.
• The installer must comply with all local codes and
regulations which govern the installation of this type
of equipment. Local codes and regulations take
precedence over any recommendations contained in
these instructions. Consult local building codes and the
National Electrical Code (ANSI CI) for special installation
requirements.
• All electrical wiring must be completed in accordance
with local, state and national codes and regulations
and with the National Electric Code (ANSI/NFPA 70)
or in Canada the Canadian Electric Code Part 1 CSA
C.22.1.
• This equipment contains liquid and gaseous refrigerant
under high pressure.
do not uSe anY Portion oF
the charge For Purging or leak teSting.
Installation or servicing should only be performed by
qualified trained personnel thoroughly familiar with this
type equipment.
• Use caution when handling this appliance or removing
components. Personal injury can occur from sharp metal
edges present in all sheet metal constructed equipment.
• This unit is designed for outdoor installations only and
should be located in a position as shown on page 4 .
Unit dimensions are shown in Figure 9 & Table 4, (page
12) .
• Follow all precautions in the literature, on tags, and
on labels provided with the equipment. Read and
thoroughly understand the instructions provided with
the equipment prior to performing the installation and
operational checkout of the equipment.
• The installer should become familiar with the units wiring
diagram before making any electrical connections to the
unit. See the unit wiring label or
Figure 10 (page 13)
and Figure 11 (page 14) .