6
6-051344 X2
212iLM Keypad Installation & Programming
Programming the 212iLM Keypad
To program the 212iLM you
fi
rst must enter program mode.
To enter program mode enter the following on the keypad:
99 # master code
✱
(default master code is 1234).
Keypad Default Settings
Option
Default Setting
Option
Default Setting
Master Code
1234
Main Relay Time
5 Seconds
Audio Keypress Feedback Enabled
Visual Keypress Feedback Enabled
Auto-Entry
Disabled
Door Bell Select
Continuous
Keypad Illumination
Enabled
Keypad Dimming
Enabled
Programming Options Chart
Command/Action
Keys to Enter/Details
Change Master Code
1 # new code
✱
new code
✱
Change Main Relay Time
relay time # 1 # master code
✱
master code
✱
Add/Change User
user location # new code
✱
new code
✱
Note: Users programmed with this command use master code relay time.
Add Toggle User
00 # user location # new code
✱
new code
✱
Add User with Speci
fi
c Relay Time relay time # user location # new code
✱
new code
✱
Command 30
Set/Clear Keypad Options
(options below,
defaults in bold
)
30 # option # set/clear #
✱ ✱
Option
Clear
Set
0 – Audio Keypress Feedback
0 = Disabled
1 = Enabled
1 – Visual Keypress Feedback
0 = Disabled
1 = Enabled
2 – Auto-Entry
0 = Disabled
1 = Enabled
3 – Keypad Illumination
0 = Disabled
1 = Enabled
4 – Keypad Dimming
0 = Disabled (always bright)
1 = Enabled
5 – Door Bell Select
0 = Disabled
1 = Enabled
Command 32
Set Bell Output Time
32 # 0 # time #
✱ ✱
Set timed output (1 – 99 seconds)
32 # 0 # 0 #
✱ ✱
Set to continuous
Command 46
Reset Keypad to Default Settings
46 # 00000 # 00000 #
✱ ✱
Exit Program Mode
Press the
✱
Key
Notes:
1. The 212iLM can store 120 user codes, including the master code. Codes can be from 1 to 6 digits long.
2. When auto-entry is enabled, users with codes the same length as the master code do not have to press the
✱
key after entering their code to enter the door.
3. When keypad dimming is disabled the backlighting remains at full intensity (does not dim).
4. When the door bell output is set to continuous the relay is energized as long the door button is pressed. When
you release the button the relay de-energizes.
