Doc No. 702070 Page 7 of 8
a) Allow the air curtain to cool for 20 minutes.
b) Restart, switch on the air curtain. If the
cut-out trips again, a qualified electrician should
be consulted.
6. User Instructions cont.
To reset the cut out
The cut-out is reset by switching OFF mains
power to the air curtain.
8. Servicing.
The air curtain should be serviced annually.
Airbloc offer a service facility, call +44 (0)1384
489700. Servicing should be undertaken by a
competent person.
Any repair or alteration carried out to this
product without the prior authority from
AmbiRad will invalidate warranty.
ALWAYS ENSURE ELECTRICAL POWER IS
SWITCHED OFF BEFORE COMMENCING
ANY SERVICING WORK ON THIS AIR
CURTAIN.
7. Maintenance.
ALWAYS ENSURE ELECTRICAL POWER
IS SWITCHED OFF BEFORE COMMENCING
ANY MAINTENANCE ON THIS AIR CURTAIN.
To obtain the best results from the air curtain, it
is essential to avoid the accumulation of dust
and dirt within the unit, on the air inlet and
discharge grilles.
For this reason regular cleaning is necessary,
paying particular attention to the removal of dirt
build up on the rotor blades.
Cleaning of the fan is best carried out with a soft
brush.
A single drop of light oil should be applied to the
fan motor bearings from time to time.
WARNING:
THIS HEATER SHOULD NOT BE
INSTALLED WHERE THERE IS A
CORROSIVE ATMOSPHERE.
