3
4
1.3 ONVIF Compatibility and Included Software Overview
This camera is ONVIF v2.1 compliant. It is designed for interoperability with
popular VMS’s and NVR’s*, with backwards compatibility to ONVIF v.1.02. For
more information on ONVIF, visit
www.onvif.org
NOTE:
Provided software is PC compatible only; Mac OS® access to the
cameras is available via Safari® browser only.
1.3.1 NVMS
•
NVMS is a client-only solution that supports up to 36 IP
cameras.
NVMS is a free software provided on the CD.
• NVMS supports all the features of the camera. It can access microSD/ SD
card recordings and camera setup over a local network.
• NVMS manual is provided on the CD.
1.3.2 CD Tools
•
CD contents Folders
IP Search
; Search find IP Cameras and set IP address and gateway
NTP Service Tool
; Time Sync Application: IP devices match one PC system time.
FTPUpdater
; Firmware Update tool
IP Support Help Files
; Website support help documents for common problems.
RTSP Tool
; provides RTSP string command f. e.g VLC or Quick-time use
SD Driver
; Ext2 driver for Windows XP to read sd Memory card on PC
Onvif_Help
; documents on Onvif specifications
Open the NTP service
; Windows XP only enables NTP time to be enabled.
Adobe Flash Player
; Flash Video player for Windows IE plugin and Apple Mac OS
Adobe AcrobatReader
; Windows and Max OS Acrobat Reader v10
Files:
IP_series_bitrate_calculator.htm
; Simple storage calculator for IP devices
NVMS_Install.exe
; NVR Software installation for PC
NVMS_Manual_1.7.pdf
; Guide to use the NVMS Software
SNMedia_Player.exe
; File Player for recorded files / backup files from devices /
NVMS.
Connection
2. CONNECTION
The camera has the following termination cables:
1. RJ45 Network Interface:
Connect to a router or switch on your network
using RJ45 Ethernet cable (Cat5e or better). 100Mhz connection. PoE
supported (class 3 PoE switch required).
NOTE:
Use the included RJ45 coupler to connect to male end of RJ45
Ethernet cable.
RJ45 Coupler
2. Audio Input (RCA):
Connect to a self-powered microphone for listen-in
audio.
3. Audio Output (RCA):
Connect to an amplifier or self-powered speaker for
intercom/2-way audio.
4. DC12V (1A):
12V DC power input terminal. Make sure to follow correct
polarity (+/-) marked on the power connector when connecting to power.
•
Minimum Power Requirement:
550mA / 6.6W.
