manualshive.com logo in svg

Nortec SAM-e, Инструкция по эксплуатации

Поделиться
Скачать
Nortec SAM-e Скачать руководство пользователя страница 87

 

SAM-e Engineering |

 84

 

Warranty 

 
 

 

NORTEC Humidity Inc. and/or NORTEC Humidity Ltd. (hereinafter collectively referred to as THE 
COMPANY), warrant for a period of ten years after installation, that THE COMPANY‟s manufactured and 
assembled products, not otherwise expressly warranted (with the exception of the tube coupling seals, 
two years only), are free from defects in material and workmanship. No warranty is made against 
corrosion, deterioration, or suitability of substituted materials used as a result of compliance with 
government regulations. 

THE COMPANY‟s obligations and liabilities under this warranty are limited to furnishing replacement 
parts to the customer, F.O.B. THE COMPANY‟s factory, providing the defective part(s) is returned freight 
prepaid by the customer. Parts used for repairs are warranted for the balance of the term of the 
warranty on the original humidifier or 90 days, whichever is longer. 

The warranties set forth herein are in lieu of all other warranties expressed or implied by law. No 
liability whatsoever shall be attached to THE COMPANY until said products have been paid for in full 
and then said liability shall be limited to the original purchase price for the product. Any further 
warranty must be in writing, signed by an officer of THE COMPANY. 

THE COMPANY‟s limited warranty on accessories, not of the companies manufacture, such as controls, 
humidistats, pumps, etc. is limited to the warranty of the original equipment manufacturer from date of 
original shipment of humidifier.  

THE COMPANY makes no warranty and assumes no liability unless the equipment is installed in strict 
accordance with a copy of the catalog and installation manual in effect at the date of purchase and by 
a contractor approved by THE COMPANY to install such equipment. 

THE COMPANY makes no warranty and assumes no liability whatsoever for consequential damage or 
damage resulting directly from misapplication, incorrect sizing or lack of proper maintenance of the 
equipment. 

THE COMPANY makes no warranty and assumes no liability whatsoever for damage resulting from 
freezing of the humidifier, supply lines, drain lines, or steam distribution systems. 

THE COMPANY makes no warranty and assumes no liability whatsoever for equipment that has failed 
due to ambient conditions when installed in locations having climates below 14°F (-10°C) during 
January or above 104°F (40°C) during July.   

THE COMPANY retains the right to change the design, specification and performance criteria of its 
products without notice or obligation. 

Содержание SAM-e

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды