Norsonic Nor265, Руководство пользователя

Страница: 24 / 32

Nor265 User Guide
24
Norsonic AS
The communication is based on RS232, which allows long cables
between the computer and the turntable. Note that the maximum
length of cables will depend on the selected baudrate, the type of cable
(capacitance) and the device controlling the turntable. It therefore not
possible to specify the maximum length, but up to 100 m has been
used successfully when combined with the lowest baudrate of 9600.
Default baudrate is 9600, but may be set to other vales. If your
computer does not have an RS232 serial interface, we recommend
connecting the turntable to the USB-port by using a commercially
available USB/RS232 adaptor.
If a command contains a parameter, there must be a space between the
command and the parameter. When a numeric value is entered for the
parameter, both comma "," and dot "." may be used as decimal
symbol. The number may be entered with any number of decimals
after the decimal point. All commands must be ended with one or
more terminators. The terminator may be: carriage return <CR>, line
feed <LF> and semicolon " ; ".
When a numeric value is returned from
N o r 2 6 5
, a dot "." is always
used as decimal symbol.
The following table contains the remote commands