Norsonic nor1217, Инструкция по эксплуатации

Страница: 8 / 28

2 Chapter 2
Assembling
Assembling
The outdoor microphone Nor1217 normally shipped
without preamplifier and microphone, since these parts
is normally taken from the Nor140 Sound Analyser.
Depending on the application, you will need a mast
or tripod for mounting the microphone system and
possibly devices for proper grounding and lightning
protection, see below.
We recommend cable type Nor1408A, which
comes in standard lengths of 5, 10, 15, 20, 30 and 50
metres – other lengths are available on request. This
cable is Teflon®-insulated and hence absorbs very lit-
tle water, which is very important in order to retain high
insulation in all weather conditions. The mantle is made
of polyurethane to ensure a robust cable, yet flexible at
low temperatures.
Birdspike
Wind, dust and
water protection
Upper part
Microphone cartridge
Microphone preamplifier
Nor1209
Base
Connector/cable
Optional tripod adaptor
with tension relief
O-ring
NOTE:
You need to use the “A” version
of the 1408 cable (1408A). The cable
comes with a threaded female connec-
tor housing that fits to the 1209 preamp-
lifier lock nut. Older versions (not “A”) of the ca-
ble do not have this treads and will not fit into the
microphone kit. The rubber protection covering
the female connector housing must be removed
in order to fit into the microphone kit.